top of page

** 18" Lever Included**

 

*18" Lever with 4" Bend: Works great in tire stock tank and any time the inlet pip rises higher than normal in the tank.

* 90 Degree Bend Lever: Good for side inlets, comes with deflector cap.

 

* Ice Prevention Option- A "Minimum" of 8-10 PSI is needed for the (Automatic Thermal Valve) to operate properly. SUCCESSFUL TEST AT -25 Degrees with little to no Ice to give your animals access to water! We recommend diverting the overflow of the water a few feet away from your Stock Tank to prevent Ice buildup around your Stock Tank when the Ice Sweeper is in Automatic operation (during colder months)

 

100 Gallons (or less) we recommend the ( .063 Nozzle)

 

100 Gallons (or more) we recommend the ( .080 Nozzle)

 

The Standard bundle includes a 4”x 8” Pan float with pigtail rod and a hot dipped galvanized 18” straight steel lever and body with brass seat. All valves are ported and plugged for Ice Prevention add ons. Several sizes and lever options to mount easily into existing tanks. The standard 4”x8” pan float is 200 cubic inches with a 3/8” tube in center and is good for up to 60 PSI with our standard valves.

 

 

* Our Ice Prevention Setup requires No Batteries & No Electricity! The Ice Sweeper turns on at 41 degrees and turns off at 42 degrees (Automatically). It is a thermal sensing valve that is constantly in contact with the water and “intermittently” releases enough water to prevent surface ice, as the water temperature dictates. No more – no less! It will keep water open in your Stock Tank to allow animals access during colder months! A Minimum of 10 PSI is needed for the Automatic thermal valves to operate properly.We recommend diverting the overflow of the water a few feet away from your Stock Tank to prevent Ice buildup around your Stock Tank when the Ice Sweeper is in operation during colder months.

 

 

-Made in the USA

-Durable and long lasting

-Good for flow up to 90 PSI

-Ported and plugged to add on our (Ice Sweeper) through ice preventer

-Rubber washer can be replaced

 

 

 

Returns 

If you place an order and cancel the order within 30 minutes, you will receive a full refund. After this timeframe there are no guarantees that the product will not be packaged and shipped to you. If it is shipped and you cancel you will be responsible for shipping charges both ways and any credit card fees. If you receive a product and it is damaged or defective, we will exchange it after receiving pictures of damages within 24-48 hours of delivery. There will be absolutely no exchanges or refunds after products have been in the water, as water causes wear and we cannot resell them. All other returns must be approved before sending back.

 

Please reach us via email at stocktanksolutions@gmail.com

(Bottom Mount) Valve/ 4”x8” (Pan Float) ICE PREVENTION AVAILABLE!

$139.00Price
    bottom of page